UJI PROFISIENSI EMISI GAS MENGGUNAKAN GAS ANALYZER SESUAI PRINSIP-PRINSIP ISO/IEC 17043 DAN ISO 13528

Anwar Hadi

Abstract


Uji profisiensi merupakan salah satu cara untuk mengetahui unjuk kerja laboratorium dengan cara uji banding antar laboratorium. Program uji profisiensi gas emisi dengan menggunakan gas analyzer bertujuan untuk evaluasi kinerja laboratorium terkait pengukuran gas emisi dan memantau kinerja laboratorium secara berkelanjutan. Penyelengaraan program uji profisiensi gas analyzer harus mengikuti kaidah-kaidah ISO/IEC 17043 yang meliputi antara lain, kesediaan laboratorium peserta uji profisiensi, penentuan kadar certified mixtures gas, pelaksanaan uji profisiensi, dan evaluasi statistik berdasarkan ISO 13528. Program uji profisiensi diikuti oleh 10 laboratorium peserta yang meliputi 7 laboratorium swasta dan 3 laboratorium pemerintah. Salah satu laboratorium menggunakan 2 peralatan yang berbeda untuk berpartisipasi dalam program uji profisiensi sehingga dalam hal ini dapat dinyatakan jumlah perserta adalah 11 laboratorium. Evaluasi uji profisiensi dengan menggunakan statistika Zscore menghasilkan bahwa 10 laboratorium peserta atau 90,9% memiliki nilai bobot lebih besar atau sama dengan 80% karena memiliki nilai |Zscore| ≤ 2. Hal ini berarti bahwa 10 laboratorium peserta tersebut memuaskan untuk minimal 4 parameter gas. Dengan demikian, 10 laboratorium peserta tersebut dapat dinyatakan sukses mengikuti program uji profisiensi untuk pengukuran gas emisi menggunakan peralatan gas analyzer.

Keywords


laboratorium pengujian; uji profisiensi; evaluasi statistika Zscore; gas analyzer; ISO/IEC 17043; ISO/IEC 17025

Full Text:

PDF

References


ISO/IEC 17043: 2008 Conformity assessment — General requirements for proficiency testing;

ISO 13528: 2005 Statistical methods for use in proficiency testing by interlaboratory comparisons;

International Standards for Organization/International Electrotechnical Commission (ISO/IEC) 17025: 2005, “General requirements for the competence of calibration and testing laboratories”, ISO, Switzerland;

International Organization for Standardization/International Electrotechnical Commission (ISO) Guide 30: 2015, “Reference materials – Selected terms and definitions”, ISO, Switzerland;

International Organization for Standardization/International Electrotechnical Commission (ISO) Guide 31: 2015, “Reference materials – Contents of certificates, labels and accompanying documentation”, ISO, Switzerland;

International Organization for Standardization/International Electrotechnical Commission (ISO) Guide 33: 2015, “Reference materials – Good practice in using reference materials”, ISO, Switzerland;

International Organization for Standardization/International Electrotechnical Commission (ISO) Guide 34: 2009, “General requirement for the competence of reference materials producers”, ISO, Switzerland;

International Organization for Standardization/International Electrotechnical Commission (ISO) Guide 35: 2006, “Reference materials – General and statistical principles for certification”, ISO, Switzerland;

US-EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, EPA600/R-12/531, http://nepis.epa.gov/Adobe/PDF/P100EKJR.pdf (download, 7 April 2016);

ISO/IEC Guide 98-3: 2008 Uncertainty of measurement ― Part 3: Guide to the expression of uncertainty in measurement;

EURACHEM/CITAC CG 4, third edition, 2012, “Quantifying uncertainty in analytical measurement”, www.citac.cc, (download, 31 Maret 2016);

The International Harmonized Protocol for the Proficiency Testing of Analytical Chemistry Laboratories (IUPAC Technical Report) Prepared For Publication By Michael Thompson, Stephen L. R. Ellison, Pure Appl. Chem., Vol. 78, No. 1, pp. 145–196, 2006. © 2006 IUPAC;

EURACHEM/CITAC, 2003, “Traceability in chemical measurement: A guide to achieving comparable results in chemical measurement”, www.citac.cc (download, 7 April 2016);

EURAMET, 2008, “Metrology – in short”, 3rd edition, www.npl.co.uk, (download, 31 Maret 2016);

Hadi, Anwar., 2000, “Sistem manajemen mutu laboratorium sesuai ISO/IEC 17025: 2005 - General requirements for the competence of testing and calibration laboratories”, PT. Gramedia Pustaka Utama, Jakarta.




DOI: https://doi.org/10.20886/jklh.2016.10.2.89-101

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Ecolab

This Journal Index by:

 

 

 

 

e-ISSN: 2502-8812, p-ISSN: 1978-5860
Ecolab is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.