Email this article THE EFFECTS OF CONTROLLED SKIDDING TECHNIQUE ON RESIDUAL STAND DAMAGE AND GROUND EXPOSURE IN SWAMP FOREST LOGGING
DOI: 10.20886/ijfr.2004.1.1.1-6Abstract
The case study was carried out at a swamp forest company in Riau in 2001. The aim of the study was to determine the effect of controlled skidding technique to residual stand damage and ground exposure. Data collected includes: felled trees, poles, trees with the diameter 20 cm up, damaged poles, damaged trees and ground exposure. The data was analyzed with t-test. The study showed the following results:
- The average of residual stand damage caused by controlled skidding technique was 29.05% for poles and 19.8% for trees. The average of residual stand damage caused by conventional skidding technique was 34.2% for poles and 24.9% for trees. The difference of 5.1% (poles) and 5.1 % (trees) were significant at 95%.
- The average of ground exposure caused by controlled skidding technique and conventionalskidding technique was respectively 16.06% and 18.4%. The difference of 2.34% was significant at 95%.
Keywords
Full Text:
PDFReferences
Directorate General of Forest Concession. 1994. Indicator technics of the Indonesian selective cutting and planting at natural land forest. Forestry Department, Jakarta.
Steel, R. G.D. and J.H. Torrie. 1976. Principles and Procedure of Statistics. Mc.Graw-Hill Book Co., New York.
Suhartana, S. 2000. Comparising between manual and excavator skidding system at swamp forest Part I: Work productivity. Forest Products Info 6(1): 31-37. Forest Products Research and Development Center, Bogor.
Suhartana, S., Dulsalam and M.M. Idris. 2000. Comparising between manual and excavator skidding system at swamp forest part II : The effect of the system to residual stand damages and ground exposure. Bulletin of Forest Products Research 17(4):231-241. Forest Products Research and Development Center, Bogor
Refbacks
- There are currently no refbacks.
