SIFAT PAPAN BLOK DENGAN INTI LIMBAH EKSPLOITASI HUTAN LAMPUNG

Suwandi Kliwon, M I Iskandar, Paribotro Sutigno

Abstract


Blockboards   of six wood species of  logging  waste from  Lampung as core strip material were manufactured in the laboratory, and  their physical  and mechanical properties were tested.

The average value of  moisture  content, board density  and strip  density  were 10.09%, 0.63  g/cm3  and 0.49  g/cm3, respectively.  Bending strength parallel to the grain varied between  690.47 kg/cm2  (red meranti)  and 1041.99 kg/cm2 (keruing).  The bending strength  perpendicular   to the grain varied between 112.40 kglcm2 (Bima) and 319.90 kg/cm2 (Pulai), and bending strength parallel to the grain were significantly affected by wood species, but bending strength  perpendicular to the grain  were not.

 


References


ASTM, 1950. ASTM standar of wood, wood preservative and related materials. American Society for Testing and Materials, Philadelphia.

JAS, 1973. Japanesse Agricultural Standard For Common Plywood.

Oey Djoen Seng, 1964. Berat jenis kayu dari jenis-jenis kayu Indonesia dan pengertian beratnya kayu untuk keperluan praktek. Pengumuman LPHH No.1, Bogor.




DOI: https://doi.org/10.20886/jphh.1987.4.2.16-20

Refbacks

  • There are currently no refbacks.


JURNAL PENELITIAN HASIL HUTAN INDEXED BY:

More...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)

eISSN : 2442-8957        pISSN : 0216-4329

       

JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.