PENGARUH PENGERASAN MATA GERGAJI DAN POLA PENGGERGAJIAN TERHADAP KARAKTERISTIK PENGGERGAJIAN KAYU KARET
Abstract
This article presents study result on sawing characteristics of rubberwood (Havea brasiliensis Muell. Arg.) subjected to different cutting edge hardness and sawing pattern. The material used in study comprised 40 logs with length 1.30 m and diameter ranging from 13. 75 to 26.00 cm. Half of these logs were sawn with full stellite cutting edge and live sawing pattern. The rest were sawn with alternate stellite tiped cutting edge and half sawing pattern. The parameters studied in sawing process consisted of power consumption, feeding rate, recovery, productivity and the relationship between log diameter and log taper with recovery.
The result of statistical analysis shows that sawblade with alternate stellite tiped consums less power compared with full stellite tiped, Meanwhile cutting edge hardness has no significant effect on feeding rate. The result also indicates that live sawing and half sawing pattern yield recovery as much as 35.9% and 40.9% respectively which was significantly dif- ferent each others. Finally, sawing productivity is not significantly affected by sawing pattern applied.
Full Text:
PDF (Bahasa Indonesia)References
Anonimus. 1987. Mill equipment aids rubberwood develop- ment. Furniture Design & Manufacturing 4(2). Asian edition. Delta Publication. Singapore p : 38 - 39.
Brown, N.C. dan J.S. Bethel. 1958. Lumber. Second edition. John Willey & Sons, Inc. New York p : 154 -162.
Gan, L.T., Ho, C.Y. dan Chew O.K. 1985. Rubberwood.Sawn timber production and recovery studies. Proceed- ing of the second rubberwood seminar FRIM.Kepong. Kuala Lumpur. p : 97 - 122.
Ho Kam Seng. 1985. Current processing techniques of rubberwood. Proceeding of the second rubberwood seminar. FRIM. Kepong Kuala Lumpur. p : 40 - 48.
Hong, L.T. 1985. Rubberwood Processing and Utilization Forest Research Institute of Malaysia. Kepong Kuala Lumpur.
Montaque, D.E. 1971. Band and circular sawmills for soft- wood Forest Products Research Bulletin No. 55. Depart- ment of Environment. London.
Rachman, 0. dan J. Balfas. 1988. Pengaruh pengerasan ma- ta gergaji terhadap beberapa sifat penggergajian. Jurnal Penelitian Hasil Hutan 5(5) Pusat Litbang Hasil Hutan Bogor. p : 279 - 286.
Schrewe, H. 1986. Sawmilling research and industry in Ma- laysia and Thailand with possible application to other Asean countries. FAO working paper No. 44. Kuala Lumpur.
DOI: https://doi.org/10.20886/jphh.1989.6.5.318-328
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.