KAJIAN KONSUMSI ENERGI BEBERAPA JENIS PRODUK INDUSTRI KAYU

Tjutju Nurhayati

Sari


The purpose of this study is to identify the energy consumption fram PLN (state electric company) electricity, diesel fuel and wood waste per m3 production of several products of wood indutries. The products included in the study are plywood, jointing board, matches and chopstick wood working, housing component, particleboard, picture frame and sawntimber.

The study revealed that energy consumption from PLN electricity per m3 productions for plywood was 149. 51 kwh, jointing board was 152.29 kw, sawntimber ranged from 34.25 to 55.87 kwh and wood working was 178.11 kwh. The consumptions of diesel fuel for plywood was 50. 97 liters, and sawntimber was 14.23 liters. The biomass energy consumption per m3 productions for picture frame was 0.08 m3 which gave the lowest figure while the highest was for jointing board, namely 0. 604 m3. the share of biomass energy per m3 productions was 82% of the total energy consumption.


Teks Lengkap:

PDF

Referensi


Anonim, 1987. Regional energy development proyect of West Java. Direktoral Jendral Energi Baru, Jakarta (Tidak diterbitkan).

------, 1987. Gasification of the main agricultural residues for power generation in Thailand. Rural Energy in the Asia-Pasific Region. Rapa Buletin 1987. FAO. Bangkok

------,1990. Diskusi dengan PT Basuki sebagi suplyer steamboiler dan kilndrying, Jakarta.

Kartasasmita, G. 1991. Sambutan Menteri Pertambangan dan Energi selaku ketua KNI - WEC. Hasil-hasil Lokakarya Energi, Jakarta.




DOI: https://doi.org/10.20886/jphh.1992.10.4.61-65

Refbacks

  • Saat ini tidak ada refbacks.


JURNAL PENELITIAN HASIL HUTAN TERINDEKS DI:

Lebih banyak...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957, pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.