PENGARUH POLA PENGGERGAJIAN DAN SUDUT SAYAT TERHADAP RENDEMEN DAN PRODUKTIVITAS PENGGERGAJIAN KAYU NIBUNG (ONCOSPERMA TIGILLARIUM)

Osly Rachman, Dede Rohadi

Abstract


Nibung (Oncosperma  tigillarium) is a member of palm family which has a good potential for  utilization. An experiment to find out the best sawing pattern and hook angle of saw blade for  better recovery and sawing productivity was conducted. Two sawing patterns (live sawing and sawing around)  and two hook  angles (20 and 27 degrees were applied).

The results indicated that sawing around pattern produced higher recovery of hard and medium  wood than live sawing as much as 8%, while the 27° of  hook  angle produced higher productivity than 20°  angle as much  as 0.30  m2/min.

Keywords


sawing pattern; hook angle; recovery and productivity; nibung wood

References


Butterfield, B.G. and B.A. Meyland. 1980. Three Dimensional Structure of Wood. Chapman and Hall. New York.

Sastrapradja, S. et al. 1978. Palem Indonesia. LBN.




DOI: https://doi.org/10.20886/jphh.1987.4.1.31-34

Refbacks

  • There are currently no refbacks.


JURNAL PENELITIAN HASIL HUTAN INDEXED BY:

More...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)

eISSN : 2442-8957        pISSN : 0216-4329

       

JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.