SIFAT PEMESINAN JENIS KAYU JAWA BARAT

Osly Rachman, Jamal Balfas

Abstract


 

This paper presents  the result of test on machining properties  of 28 wood species from  Bogor and Sukabumi, West Java.  The test method used was the modified  ASTM  D-1666 described in the Forest Products  Research Institut  Report No.  160 (1982).   The samples  (25 pieces/species) were dried  to equilibrium moisture  content condition (15  to  18%).  The machining  properties   investigated   were planning, shaping, boring, mortising,  turning and sanding.

The species that have good or very good machining properties  are kobari, pasang jambe,  pasang beureum,  mahoni  daun lebar, pentadesma, cloropora,  eucalyptus,  meranti  batu,  pinus  I, mahoni,  mahagoni  and pinus  III.  Species such  as kelumpang,  entorolobium   and  cecropia  are consistenlly poorer. The other species are good in some properties  and fair or poor  in others.

 


References


ASTM, 1974. Standard Method of Conducting Machining Tests of Wood and Wood-base Materials. Annual book of ASTM, Philadelphia.

Abdurachman, A.J. dan Karnasudirdja, S. 1982. Sifat Pemesinan Kayu-kayu Indonesia. Laporan BPHH No. 160, Bogor.

Koch, 1964. Wood Machining Process. The Ronald Press Co. New York.

Kubler, H. 1980. Wood as Building and Hobby Material. John Wiley & Sons. New York.

Oey Djoen Seng, 1964. Berat jenis dari jenis-jenis kayu Indonesia dan Pengertian Berat Kayu untuk Keperluan Praktek. Pengumuman LPHH No. 1, Bogor.




DOI: https://doi.org/10.20886/jphh.1987.4.3.54-64

Refbacks

  • There are currently no refbacks.


JURNAL PENELITIAN HASIL HUTAN INDEXED BY:

More...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)

eISSN : 2442-8957        pISSN : 0216-4329

       

JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.