SIFAT VENIR DAN KAYU LAPIS BEBERAPA JENIS KAYU INDONESIA
Abstract
This report deals with peeling, physical and mechanical properties of veneer and some physicai and mechanical properties of plywood (triply) of 16 wood species from East Kalimantan and 1 species from West Java. The logs of all wood species tested could be peeled without heating or steaming. Veneer of 0.9 mm and 1.5 mm in thickness could be peeled at cutting angles between 89° and 92°.
The yield of green veneer was 46. 7% and the average shrinkage was 10. 7% with a minimum of 5.9% (jabon) and maximum of 13.9% (merembung). Thickness swelling from oven dry to air dry varied between 2. 7% (medang tanduk) and 3.9%(nyatoh) with an average of 3.4%.
The bonding strength of plywood made of 5 wood species (29. 4%) was in complience with the Indonesian standard for type II or water resistant, 11 wood species (64. 7%) with Japanese standard and 6 species (35.3%) with German standard.
The average thickness reduction due to pressing pressure was 0.23 mm with minimum of 0. 07 mm (buah sayap) and maximum of 0.44 mm (merant imerah).
The specific gravity of wood used in this experiment varied between 0.30 (merembung) and 0. 80 (kapur). The specific gravity of plywood ranged from 0.46 (jabon) to 0.89 (medang tanduk).
The average values of bending strength parallel and perpendicular to grain of 3 mm triply were 1221.29 kg/cm2 and 603.68 kg/cm2, respectively. The tensile strength parallel and perpendicular to grain were 625.95 kg/cm2 and 539.93 kg/cm2, respectively. The average values for bending strength parallel and perpendicular to grain of 4 mm triply were 1096.31 kg/cm2 and 398.8 kg/cm2, respectively. The tensile strengths parallel and perpendicular to grain were 696.46 kg!/cm2 and 443.95 kg/cm2, and 443.95 kg/cm2. respectively.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Anonimous,1958.Ratgeber fur die Holzverleimung.
BACF,ludwigschafen
ASTM Standard on Wood, Wood Preservatives and Related materials. American Society for testing Materials,Philadelphia.
Japanesse Agricultural Standard for Common Plywood and its commentary. The Japan Plywood Manufacture's Association.
DIN Taschenbuch 60. Beuth Verlag Gmbh Bern, Koln,Frankfurt ( Main).
Surat Keputusan Direktorat Jendral Kehutanan No.41/Ktps/DJ/1/1976.
Fleischer,H.O. 1949. Exsperiment in rotary cutting.forest product Research Society Procedding 3 : 137-155.
Kartasudjana, I & A. Martawidjaya,1973. Kayu Perdagangan Indonesia Sifat dan Kegunaannya. Bagian I Laporan LPHH No.3,Bogor.
Martawijaya, A & I . Kartasudjana, 1977. Ciri Umum, Sifat dan Kegunaan Jenis-Jenis Kayu Indonesia. Publikasi Khusus LPHH No.41, Bogor.
Djoen Seng, 1964.Berat Jenis dari jenis-jenis kayu Indonesia dan pengertian beratnya kayu untuk keperluan praktek,Pengumuman LPHH No.1, Bogor.
DOI: https://doi.org/10.20886/jphh.1986.3.4.1-8
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.